G-100: The
G-100 uses high performance Nylon® and our Vevetrol®, multi-spring
system to lift shades up to 16 pounds on a 1 12" tube. (This clutch
has no internal gearing)
G-200: The G-200 uses RollEase's patented* planetary gear and clutch combination to greatly reduce the pull force needed to lift a shade.
On a 96" x 144" Phifer® 4400 shade, the pull
force is cut by nearly 30% when compared to the G-100 (see chart). The components
are made of a combination Teflon® and glass filled Nylon®, polycarbonate
and thermopolymers to ensure the ultimate in smoothness. The G-200 works
with shades up to 24 pounds on a 1 12" tube and 18 pounds on a 2"
tube.
G-300: The G-300 combines the Geared G-200 with RollEase's unique spring assist lift system. Use our copyrighted software to build shades weighing up to 30 pounds that only require a consistent 6-7 pounds of pull force to lift. The G-300 is the perfect choice whenever your customer demands the ultimate in easy lifting and a great alternative to costly motors.
G-400: The NEW G-400 uses RollEase's patented* planetary gear and clutch combination to greatly reduce the pull force needed to lift a shade up to 53 lbs (23,85 kgs). It's another a great alternative to costly motors.
G-400 minimum holding torque:
Pull forces to raise the shade at it's heaviest point (shade fuly down)
on a 20 lb (9 kgs) shade on 2.5 inch (63.5 mm) tube, pull force = 9.0 lbs.
(4,05 kgs)
ARCHITECTS
AND SPEC WRITERS;
Fast + Easy Access to 300,000 pages of Building
Product Information for the Architectural and Spec Writing Communities.
The RollEase
ARCAT page features CSI 3-Part Specs and Spec
Writing Wizard. Specs available in MicroSoft Word, Wordperfect, rtf, and
asci formats.
